Table of Contents
Advertisement
Step 1: Assembling the Stand
Procedure
Position the vertical stands parallel to each other and separated by approximately
A
1,980 mm (77.9 in.) for the 64-inch model or approximately 1,710 mm (67.3 in.) for
the 54-inch model.
Face the bolt-attaching surface of the vertical stands to the inside.
Approximately 1,980 mm (77.9 in.) for the 64-inch model
Approximately 1,710 mm (67.3 in.) for the 54-inch model
Attach the stand beam to the vertical stands.
B
Temporarily tighten the bolts in the three locations on the left and right. The stand beam has no
particular front and rear orientation.
1. Assembly
Tighten
temporarily
Bolts: 6
23
2.Installation
Advertisement
Table of Contents
