Roland CAMM-1 GR2-640 Setup Manual page 26

1. Assembly
Lock the caster on each bottom stand with wheels or cushions and place the vertical
C
stands on them.
Position each bottom stand with wheels or cushions so the caster with a brake is in front.
Attach the vertical stands to the bottom stands with wheels or cushions.
D
Temporarily tighten the bolts in the two locations on the left and right.
Fully tighten all the bolts.
E
Tighten the bolts evenly on the left and right in the order of
24
2.Installation
Front
12
Tighten
temporarily
Bolts: 4
Tighten
fully
Bolts: 10