Roland CAMM-1 GR2-640 Setup Manual page 7

Hide thumbs Also See for CAMM-1 GR2-640:
Table of Contents

Advertisement

Danger of electrical short, electrical shock, or fire
WARNING
Connect to an electrical outlet that
complies with this machine's ratings (for
voltage, frequency, and current).
Incorrect voltage or insufficient current
may cause fire or electrical shock.
Never use outside or in any location
where exposure to water or high humid-
ity may occur. Do not touch the power
cord, plug, or electrical outlet with wet
hands.
Doing so may result in fire or electrical
shock.
Never allow any foreign object to get in-
side. Never expose the machine to liquid
spills.
Inserting objects such as coins or matches
or allowing beverages to be spilled into
the ventilation ports may result in fire or
electrical shock. If anything gets inside,
immediately disconnect the power cord
and contact your authorized Roland DG
Corporation dealer.
Never place any flammable object
nearby. Never use a combustible aerosol
spray nearby. Never use in any location
where gases can accumulate.
Combustion or explosion could occur.
Handle the power cord, plug, and electri-
cal outlet correctly and with care. Never
use any article that is damaged.
Using a damaged article may result in fire
or electrical shock.
When using an extension cord or power
strip, use one that adequately satisfies
the machine's ratings (for voltage, fre-
quency, and current).
Use of multiple electrical loads on a single
electrical outlet or of a lengthy extension
cord may cause fire.
Connect to ground.
This can prevent fire or electrical shock
due to current leakage in the event of
malfunction.
To Ensure Safe Use
WARNING
Position so that the power plug is within
immediate reach at all times.
This is to enable quick disconnection of the
power plug in the event of an emergency.
Install the machine next to an electrical
outlet. Also, provide enough empty space
to allow immediate access to the electrical
outlet.
If sparks, smoke, burning odors, unusual
sounds, or abnormal operation occur, im-
mediately unplug the power cord. Never
use if any component is damaged.
Continuing to use the machine may result
in fire, electrical shock, or injury. Contact
your authorized Roland DG Corporation
dealer.
Do not use the supplied power cord for
other products.
Never use the machine for any purpose
for which it is not intended, or use the
machine in an excessive manner that
exceeds its capacity.
Doing so may result in injury or fire.
For accessories (optional and consum-
able items, power cord, and the like), use
only genuine articles compatible with
this machine.
Incompatible items may lead to an acci-
dent.
If the machine will not be used for a long
period, disconnect the power cord.
This prevents an accident caused by un-
expected electric leakage or unintentional
start of the machine.
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Camm-1 gr2-540

Table of Contents