Table of Contents
Advertisement
If you're at an extension phone, you'll need to lift the handset during the
F/T Ring Time and press # 5 1 between the F/T pseudo-rings. If no one
is on the line, or if someone wants to send you a fax, send the call back
to the machine by pressing
Changing Remote Codes
Remote Codes might not work with some telephone systems. The preset
Activation Code is
If you are always disconnected when accessing your external TAD
remotely, try changing the Activation Code from
Deactivation Code from # 5 1 to 1 1 1. You cannot use the same number
for the Activation Code and the Deactivation Code.
To change Remote Codes
1
2
3
4
5
6
Printing a Fax from Memory
(Only for MFC-9050)
See
If you have fax storage ON for remote retrieval, you can still print a fax
"Setting Fax
from the machine's memory when you are at your machine:
Storage"
1
chap. 9
2
3
5 1. The preset Deactivation Code is # 5 1.
For the MFC-9050, Press Menu, 2, 4.
For the MFC-9550, Press Menu, 1, 2, 4.
Press
or
to select ON (or OFF).
REMOTE ACT.:ON
Press Set when the screen displays the setting you want.
If you want to, enter a new Remote Activation Code, then press Set.
ACT.CODE:*51
If you want to, enter a new Remote Deactivation Code, then press
Set.
DEACT.CODE:#51
Press Stop to exit.
Press Menu, 8, 4.
Press Start.
After all the data saved in the memory is printed out. Press Stop.
S E T U P R E C E I V E
5 1.
5 1 to # # # and the
45
Advertisement
Table of Contents
