Accessory List - Brother MFC-9550 Owner's Manual

Accessory List

Model Name
1 MB Memory Board
2 MB Memory Board
Laser Fax Toner
Laser Fax Drum
Change Answer Mode
Press 9 8
then for TAD, press 1.
(For MFC-9050)
Exit Remote Operation
Press 9 0.
Change Remote Access Code
1 Press Menu, 8, 3.
2 Enter the 3-digit number. The
used.
3 Press Set.
(For MFC-9550)
4 Press Stop to exit.
Check Receiving Status
Press 9 7
then for Fax message, press 1.
Voice message, press 2.
1 long beep — received messages
3 short beeps — no messages
Change Answer Mode
Press 9 8
then for Message Manager (TAD mode),
press 1.
Fax/Tel (F/T), press 2.
Fax Only, press 3.
Exit Remote Operation
Press 9 0.
Fax/Tel (F/T), press 2.
Fax, press 3.
cannot be
5
Description
ME-1000
ME-2000
TN-200
DR-200
R C
EMOTE ONTROL
Using Remote Access Code
1 Dial your machine phone number from a
touch tone phone.
2 Enter your Remote Control Access Code
(159 ) after the beep.
3 Your machine signals the kinds of messages
received:
1 long beep — Fax message(s)
No beeps — no messages
4 After 2 short beeps, enter a command.
5 Press 9 0 to reset your machine when you
finish.
6 Hang up.
4
M M
ESSAGE
R C
EMOTE
Using Remote Access Code
1
Dial your fax machine phone number
from a touch tone phone.
2 Enter your Remote Control Access Code
(159 ) after the beep.
3 The fax machine signals the kinds of
messages received:
1 long beep — Fax message(s)
2 long beeps — Voice message(s)
3 long beeps — Fax and Voice message(s)
No beeps — no messages
4 After 2 short beeps, enter a command.
Press 9 0 to reset the machine when you
5
finish.
6 Hang up.
6
187
A C
CCESS ARD
1
ANAGER
A C
ONTROL CCESS ARD
1