S E T T I N G U P T H E
Software for your MFC-9550
M A C H I N E A N D C O M P U T E R T O W O R K T O G E T H E R
Software/Drivers
The following software is provided to optimize the use of your MFC -
9550. The software can run under Windows
®
Windows NT
Workstation Version 4.0.
Printer Driver*- The printer driver creates the print data from the
applications, controls transmission and makes
settings for printing. It is necessary to install the
MFC-9550 printer driver into your PC for printing.
Scanner Driver*-The MFC-9550 scanner driver is TWAIN
compliant. You can use the scanner directly from
TWAIN compliant applications. In the scanner
driver you can change settings for scanning.
Maintenance Utility for DOS-
This is utility software running under MS-DOS. If
you are not using Windows, you can use the
machine's HP/Laserjet IIP emulation to print. Some
settings which are unique to the machine and
maintenance operations can be made with this
utility.
MFL Pro Software-
This software allows you to send and receive faxes
with your PC, please refer to the MFL-PRO Manual
for further information. The Brother Resource
Manager must be installed to use this software.
* These drivers are supplied within the Brother Resource Manager.
Installing the Software/Drivers under
Windows
®
All the software and drivers are supplied on a single CD. An Auto-Install
program will guide you through most of the installation process.
1
Make sure that your machine is connected to your computer and that
the machine is switched on.
®
3.1, 3.11 and 95, 98 and
117