The Static Dhcp Screen; Before You Begin - ZyXEL Communications LTE7461-M602 User Manual

Table 22 Network Setting > Home Networking > LAN Setup (continued)
LABEL
DNS Query Scenario
Apply
Cancel

7.3 The Static DHCP Screen

When any of the LAN clients in your network want an assigned fixed IP address, add a static lease for
each LAN client. Knowing the LAN client's MAC addresses is necessary. Assign IP addresses on the LAN
to specific individual computers based on their MAC addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned
at the factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02.

7.3.1 Before You Begin

Find out the MAC addresses of your network devices if you intend to add them to the Static DHCP
screen.
Use this screen to change your Zyxel Device's static DHCP settings. Click Network Setting > Home
Networking > Static DHCP to open the following screen.
Figure 41 Network Setting > Home Networking > Static DHCP
The following table describes the labels in this screen.
Table 23 Network Setting > Home Networking > Static DHCP
LABEL
Static DHCP
Configuration
#
Chapter 7 Home Networking
DESCRIPTION
Select how the Zyxel Device handles clients' DNS information requests.
IPv4/IPv6 DNS Server: The Zyxel Device forwards the requests to both the IPv4 and IPv6 DNS
servers and sends clients the first DNS information it receives.
IPv6 DNS Server Only: The Zyxel Device forwards the requests to the IPv6 DNS server and
sends clients the DNS information it receives.
IPv4 DNS Server Only: The Zyxel Device forwards the requests to the IPv4 DNS server and
sends clients the DNS information it receives.
IPv6 DNS Server First: The Zyxel Device forwards the requests to the IPv6 DNS server first and
then the IPv4 DNS server. Then it sends clients the first DNS information it receives.
IPv4 DNS Server First: The Zyxel Device forwards the requests to the IPv4 DNS server first and
then the IPv6 DNS server. Then it sends clients the first DNS information it receives.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
DESCRIPTION
Click this to configure a static DHCP entry.
This is the index number of the entry.
LTE7461-M602 User's Guide
70