Overview - ZyXEL Communications LTE7461-M602 User Manual

1.1 Overview

The Zyxel Device is an outdoor LTE (Long Term Evolution) router that supports (but not limited to) the
following:
• Gigabit Ethernet connection
• DHCP (Dynamic Host Configuration Protocol) server
• NAT (Network Address Translation)
• DMZ (Demilitarized Zone)
• Port Forwarding/Triggering
• ALG (Application Layer Gateway)
• Bridge/Router mode
• Dynamic DNS (Domain Name System) for the first APN (Access Point Name)
• Static/Dynamic Route setting for RIP (Routing Information Protocol)
• Remote Management under Bridge mode
• Address Resolution Protocol (ARP)
• Firewall that uses Stateful Packet Inspection (SPI) technology
• Protects against Denial of Service (DoS) attacks
• Filter of LAN MAC address, LAN IP address and URLs
• Local and remote device management
• Firmware upgrade via TR-069 and Web Configurator
The embedded Web-based Configurator enables straightforward management and maintenance. Just
insert the SIM card (with an active data plan) and make the hardware connections. See the Quick Start
Guide for how to do the hardware installation, wall mounting, Internet setup and turning on/off WiFi
(optional).
1.2 Application for the Zyxel Device
Wireless WAN
The LTE Device can connect to the Internet through a 2G/3G/4G LTE SIM card to access a wireless WAN
connection. Just insert a SIM card into the SIM card slot at the bottom of the Zyxel Device.
Note: You must insert the SIM card into the card slot before turning on the Zyxel Device.
Introduction
LTE7461-M602 User's Guide
13
C
H A P T E R
1