The Port Forwarding Screen - ZyXEL Communications LTE7461-M602 User Manual

Figure 71 Multiple Servers Behind NAT Example

9.2.1 The Port Forwarding Screen

Click Network Setting > NAT to open the Port Forwarding screen.
Note: TCP port 7547 is reserved for TR-069 requests.
Figure 72 Network Setting > NAT > Port Forwarding
The following table describes the fields in this screen.
Table 33 Network Setting > NAT > Port Forwarding
LABEL
Add New Rule
#
Status
Service Name
Originating IP
WAN Interface
Server IP Address
Start Port
End Port
Chapter 9 Network Address Translation (NAT)
DESCRIPTION
Click this to add a new port forwarding rule.
This is the index number of the entry.
This field indicates whether the rule is active or not.
A yellow bulb signifies that this rule is active. A gray bulb signifies that this rule is not active.
This is the service's name. This shows User Defined if you manually added a service. You can
change this by clicking the edit icon.
This is the source's IP address.
Select the WAN interface for which to configure NAT port forwarding rules.
This is the server's IP address.
This is the first external port number that identifies a service.
This is the last external port number that identifies a service.
LTE7461-M602 User's Guide
97