ZyXEL Communications LTE7461-M602 User Manual page 72

Table 23 Network Setting > Home Networking > Static DHCP (continued)
LABEL DESCRIPTION
Status Active
MAC Address The MAC (Media Access Control) or Ethernet address on a LAN (Local Area Network) is
unique to your computer (six pairs of hexadecimal notation).
A network interface card such as an Ethernet adapter has a hardwired address that is
assigned at the factory. This address follows an industry standard that ensures no other
adapter has a similar address.
IP Address This field displays the IP address relative to the # field listed above.
Modify Click the Edit icon to configure the connection.
If you click Static DHCP Configuration in the Static DHCP screen, the following screen displays.
Figure 42 Static DHCP: Static DHCP Configuration
The following table describes the labels in this screen.
Table 24 Static DHCP: Configuration
LABEL DESCRIPTION
Active Enable static DHCP in your Zyxel Device
Group Name This displays the
IP Type The IP Type is normally IPv4 (non-configurable).
Select Device Info Select between
and IP Address); or selecting an existing device would show its MAC address and IP address.
MAC Address Enter the MAC address of a computer on your LAN if you select
field.
IP Address Enter the IP address that you want to assign to the computer on your LAN with the MAC
address that you will also specify if you select Manual Input in the previous field.
OK Click
Cancel Click
Chapter 7 Home Networking
Group Name, usually Default.
Manual Input which allows you to enter the next two fields (MAC Address
OK to save your changes.
Cancel to exit this screen without saving.
LTE7461-M602 User's Guide
71
.
Manual Input in the previous