Step 4 Ssid - ZyXEL Communications NWA Series User Manual

7.2.4 Ste p 4 SSID
Use this screen to enable, disable or edit an SSID profile.
Select an SSID profile and click the
such as the SSID (WiFi network name) and WiFi password, double-click the SSID profile entry from the list.
See Section 7.2.4.1 on page 52
Note: You cannot add or remove an SSID profile after running the setup wizard.
Fig ure 26 Wizard: SSID
7.2.4.1 Edit SSID Pro file
Use this screen to configure an SSID profile.
The screen varies depending on the security type you selected.
• SSID : Enter a descriptive name of up to 32 printable characters for the wireless LAN.
VL AN ID
• : Enter a VLAN ID for the Zyxel Device to use to tag traffic originating from this SSID.
Ba nd Mo de
IEEE 802.11b/g/n wireless clients. 5 GHz is the frequency used by IEEE 802.11ac/a/n wireless clients.
• Se c urity T ype
any wireless client to associate this network without authentication.
• Pe rso na l : If you set
and 63 case-sensitive ASCII characters (including spaces and symbols) or 64 hexadecimal
characters.
• Ente rprise
Device use the specified RADIUS server. You have to enter the IP address, port number and shared
secret password of the RADIUS server to be used for authentication.
Click O K to proceed. Click
Chapter 7 Setup Wizard
Sta tus
for more information.
: Select the wireless band which this profile should use. 2.4 GHz is the frequency used by
: Select WPA2 to add security on this wireless network. Otherwise, select
Se c urity T ype to
: Select this option and the
C a nc e l to close the screen without saving.
NWA/WAC/WAX Series User's Guide
switch to turn it on or off. To change an SSID profile's settings,
WPA2 and select Pe rso na l
Prim a ry / Se c o nda ry RADIUS Se rve r
52
O PEN
, enter a pre-shared key of between 8
check box to have the Zyxel
to allow