ZyXEL Communications NWA Series User Manual page 112

Table 28 Configuration > Wireless > AP Management (continued)
L ABEL DESC RIPT IO N
Edit Click
tables you can just click a table entry and edit it directly in the table. For those types of
tables small red triangles display for table entries with changes that you have not yet
applied.
# This field shows the index number of the SSID
SSID Profile This field displays the SSID profile that is associated with the radio profile.
Radio 2 Setting
Radio 2 Activate This displays if the Zyxel Device has a second radio.
Select the check box to enable the Zyxel Device's second radio.
Radio 2 OP Mode This displays if the Zyxel Device has a second radio. Select the operating mode for radio 2.
AP Mo de
traffic through to the Zyxel Device to be managed (or subsequently passed on to an
upstream gateway for managing).
MO N Mo de
information on to the Zyxel Device where it can be determined if those APs are friendly or
rogue. If a radio is set to this mode it cannot receive connections from wireless clients (see
Section 1.2.3 on page
Ro o t AP
other APs (in repeater mode) to form a WDS to extend its wireless network.
Re pe a te r
AP or repeater mode) to form a WDS.
Radio 2 Profile This displays if the Zyxel Device has a second radio. Select the radio profile the radio uses.
Note: You can only apply a 5G AP radio profile to radio 2. Otherwise, the second
Radio 2 WDS Profile This field is available only when the radio is in
Select the WDS profile the radio uses to connect to a root AP or repeater.
Enable WDS Wireless This field is available only when the radio is in
Bridging
A Wireless Distribution System is a wireless connection between two or more APs. Enable this
to establish wireless links with other APs. See
Only the models below support this feature at the time of writing:
•
•
•
•
•
•
•
•
•
Note: You must enable the same wireless security settings on the Zyxel Device
Uplink Selection This field is available only when the radio is in
Mode
Select
profile to connect to a root AP or repeater.
Select
address specified in the
Chapter 10 Wireless
Edit icon ( )to open a screen where you can modify the entry's settings. In some
means the radio can receive connections from wireless clients and pass their data
means the radio monitors the broadcast area for other APs, then passes their
15).
means the radio acts as an AP and also supports the wireless connections with
means the radio can establish a wireless connection with other APs (in either root
radio will not be working.
WAC6103D-I
WAC6303D-S
WAC6502D-E
WAC502D-S
WAC6503D-S
WAC6552D-S
WAC6553D-E
WAX610D
WAX650S
and on all wireless clients that you want to associate with it.
AUT O to have the Zyxel Device automatically use the settings in the applied WDS
Ma nua l to have the Zyxel Device connect to the root AP or repeater with tbe MAC
Ra dio 2 Uplink MAC Addre ss
NWA/WAC/WAX Series User's Guide
79
Ro o t AP or Re pe a te r mode.
Ro o t AP or Re pe a te r mode.
Section 0.2 on page 13 for more information.
Re pe a te r mode.
field.