Firmware Package - ZyXEL Communications NWA Series User Manual

C:\>ftp 192.168.1.2
Connected to 192.168.1.2.
220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
220-You are user number 1 of 5 allowed.
220-Local time is now 21:28. Server port: 21.
220-This is a private system - No anonymous login
220 You will be disconnected after 600 minutes of inactivity.
User (192.168.1.2:(none)): admin
331 User admin OK. Password required
Password:
230 OK. Current restricted directory is /
ftp> cd conf
250 OK. Current directory is /conf
ftp> ls
200 PORT command successful
150 Connecting to port 5001
lastgood.conf
startup-config.conf
system-default.conf
226 3 matches total
ftp: 57 bytes received in 0.33Seconds 0.17Kbytes/sec.
ftp> get startup-config.conf
200 PORT command successful
150 Connecting to port 5002
226-File successfully transferred
226 0.002 seconds (measured here), 1.66 Mbytes per second
ftp: 2928 bytes received in 0.02Seconds 183.00Kbytes/sec.
ftp>
9
Wait for the file transfer to complete.
10 Enter "quit" to exit the ftp prompt.
18.3 Firm wa re Pa c ka g e
Ma inte na nc e > File Ma na g e r > Firm wa re Pa c ka g e
Click
screen to check your current firmware version and upload firmware to the Zyxel Device.
Note: The Web Configurator is the recommended method for uploading firmware. You only
need to use the command line interface if you need to recover the firmware. See the
CLI Reference Guide for how to determine if you need to recover the firmware and
how to recover it.
Find the firmware package at www.zyxel.com in a file that (usually) uses a .bin extension.
T he firm wa re upda te c a n ta ke up to five m inute s. Do no t turn o ff o r re se t
the Zyxe l De vic e while the firm wa re upda te is in pro g re ss!
Chapter 18 File Manager
NWA/WAC/WAX Series User's Guide
173
to open this screen. Use the
Firm wa re Pa c ka g e