Brother MFC-820CW User Manual page 35

How to load envelopes
a
Before loading, press the corners and
sides of the envelopes to make them as
flat as possible.
Note
If the envelopes are 'double-feeding,' put
one envelope in the paper tray at a time.
b
Put the envelopes into the paper tray
with the address side down and the
leading edge (top of the envelopes) in
first. Slide the paper side guide to fit the
width of the envelopes.
If you have problems when printing on
envelopes, try the following suggestions:
a
Open the envelope flap.
b
Make sure the open flap is either to the
side of the envelope or to the back edge
of the envelope when printing.
Loading documents and paper
c
Adjust the size and margin in your
2
application.
How to load post cards
a
Raise the paper stop (1) and put the
post cards (2) into the paper tray. Slide
the paper side guide (3) to fit the width of
the post cards.
2
2
2
19