Logout; Err - Teledyne 2120XL Operating Instructions Manual

Trace nitrogen in argon analyzer

Table of Contents

Operation

4.5.1.4 L

OGOUT

The Logout function provides a convenient means of leaving the

analyzer in a password protected mode without having to shut the

instrument off. By entering Logout, you effectively log off the

instrument leaving the system protected against use until the password is

reentered. To log out, press the System button to enter the System

function.

Use the ◄►arrow keys to position the blinking over the Logout

function, and press ENTER to Log out. The screen will display the

message:

During analysis, if the system detects a fault, and error signal is

sent and shows a flashing 'E' in the right corner of the Analyze screen

as follows:

To obtain more information about the error, press SYSTEM and

navigate to the Err function. Then pres ENTER to display the particular

error screen. There are 14 possible error screens that may appear. The

first line displays the particular fault while the second line informs the

user to press ENTER to clear the error.

Note: The particular fault must be remedied before attempting to

clear the error, otherwise the error indication will

immediately regenerate on the Analyze screen.

The following notifications may appear on the Err screen first line:

 LED Display Error

 Flow Error

Teledyne Analytical Instruments

Dig_filt Self-test

Pwd Logout Err More

Protected Until

Password Reentered

2.3

Rng: 100.0pb 100.2

Model 2120XL

Table of Contents