Writing programs to the CPU module
Operating procedure
The "Write to PLC" screen is displayed.
When the Write to PLC function is properly executed, the following message is displayed.
The program writing is completed.
Click
to close the "Write to PLC" screen.
P
oint
PLC parameter
The PLC parameter is necessary to start the CPU module. The default values are used in
this system configuration.
For details of setting parameters, refer to the following manuals.
Qn(H)/QnPH/QnPRHCPU User's Manual (Function Explanation, Program
Fundamentals): SH-080808ENG
QnUCPU User's Manual (Function Explanation, Program Fundamentals):
SH-080807ENG
24
1 Select [Online]
[Write to PLC] (
2 Click "Param+Prog".
3 "Program" and "Parameter"
are checked.
4 Click the
button.
5 Click the
button.
).