4. Feed the end of the paper along with the paper positioning guides as shown in the diagram below.
5. While holding the paper down, slowly close the print roller arm, and push down the arm until your
hear a click locking the arm.
6. Cut off the excess paper and replace the printer cover.
7. Press the key to make sure the paper end comes out of the printer cover and clean paper appears.
If the paper end does not come out. Open the printer cover, and pass the paper end between the
paper cutter and the paper guide of the printer cover, and replace the cover.
XEA147BK and XEA147WH Frequently Asked Questions
Page 6 of 21