Advertisement
How to install the batteries, and why should I do so?
The XEA147 uses 3 x AA size batteries to hold its preset, and sales data in memory when it is switched
off. If you do not install 3 x AA size batteries; the XEA147 will be cleared of all preset, and sales data
when it is turned off.
1. Lift the printer cover up and forward, and detach it. Be careful of the paper cutter to avoid cutting
yourself.
2. Open the battery compartment cover next to the paper roll cradle.
3. Install 3 alkaline AA size batteries.
4. When the batteries are properly installed the "
Note: If you press a key by mistake, an error symbol "PPPPPPPPPP" might be displayed. Press
CL to clear the symbol after installing the paper rolls. (see next question).
5. Close the battery compartment cover.
A set of new alkaline batteries once installed will keep the memory for up to one year without power.
Please see the question on how to replace the batteries for details on when and how to replace the batteries.
If the unit is not used for some months, you might not get any warning when you turn it on that the
batteries have failed. In this instance, the XEA147 will initialise itself.
XEA147BK and XEA147WH Frequently Asked Questions
" message on the display will disappear.
Page 3 of 21
Advertisement
