Updating Phoenix Installation - Nokia RM-94 Service Software And Tuning Instructions

Nokia Customer Care
Now the installation of Phoenix Service SW is ready and it can be used after:
• installing phone model specific Phone Data Package for Phoenix
• configuring users and connections
FLS-4S can be used right away.
FPS-8* can be used after updating Flash Update Package files to it .

Updating Phoenix installation

If you already have the Phoenix Service SW installed on your computer, sooner or later there
will be need to update it when new versions are released.
Always use the latest available versions of both the Phoenix Service SW and the Phone Spe-
cific Data Package. Instructions can be found in phone model specific Technical Bulletins and
Phone Data package readme.txt files (shown during installation).
To update Phoenix, you need to take exactly the same steps as when installing it for the first
time.
• Download the installation package to your computer hard disk.
• Close all other programs.
• Run the application file (e.g. phoenix_service_sw_
A newer version of Phoenix will be installed.
Driver versions will be checked and if need be, updated.
When you update Phoenix from an old to a new version (e.g. a11_2003_41_5_28 to
a12_2003_50_6_35 ), the update will take place automatically without uninstallation.
If you try to update Phoenix with the same version that you already have (e.g.
), you are asked if you want to uninstall the version of Phoenix you have on your
2004_46_4_75
PC. In this case, you can choose between total uninstallation and repair, just like when you
choose to uninstall Phoenix service software from the Windows control panel.
If you try to install an older version (e.g. downgrade from
a11_2003_41_5_28) the installation will be interrupted.
12
3 - Service Software and Tuning Instructions
COMPANY CONFIDENTIAL
Copyright © 2005 Nokia. All Rights Reserved.
.exe).
2004_46_4_75
2004_46_4_75 to
to
2004_46_4_75
RM-94
Issue 1 04/2005