Nokia RM-94 Service Software And Tuning Instructions page 47

RM-94
3 - Service Software and Tuning Instructions
The setup should now look like this:
The results must fulfill the following limits:
Calibration value / Test case
AFC value / check AFC_VALUE [DAC]
AFC Slope / check AFC_SLOPE [DAC]
Rssi 4 / Check RX GSM xxx Gain A 5 [dB]
Rssi 5 / Check RX GSM xxx Gain A 6 [dB]
Rssi 6 / Check RX GSM xxx Gain A 7 [dB]
Rssi 7 / Check RX GSM xxx Gain A 8 [dB]
GSM xxx means the selected band: GSM900/GSM1800 or GSM1900 (values in brackets).
If all values are within the low and high limits ranges
Press <Save and Continue>
If one or more of the values are out of the above specified limit ranges, do not save them to the
phone memory. Stop the Rx calibration and repeat troubleshooting.
Issue 1 04/2005 COMPANY CONFIDENTIAL
Copyright © 2005 Nokia. All Rights Reserved.
Nokia Customer Care
Typical Low limit
53 -350
128 87
89 (92) 83 (86)
94 (99) 88 (93)
100 (105) 94 (99)
106 (111) 100 (105)
High limit
+350
208
95 (98)
100 (105)
106 (111)
112 (117)
47