Nokia RM-94 Service Software And Tuning Instructions page 55

RM-94
3 - Service Software and Tuning Instructions
Tx power level tuning GSM900 in EDGE mode
On the popped up window press ok.
The setup should now look like this:
Adjust all power coefficients and the base level according to the target values.
Check if all levels match the target values, correct if necessary and then press <Save&Contin-
ue>.
Note: For Phones with RFMD power amplifier also the EDGE power level 7 needs to be tuned.
The window (like shown above) will pop up accordingly.
Tx power level tuning GSM1800 & GSM1900 in GMSK mode
On the popped up window, press ok.
Tuning of GSM1800 and GSM1900 work in the same manner, after calibrating the 1800 MHz
band, you start calibrating the 1900 MHz band.
Issue 1 04/2005 COMPANY CONFIDENTIAL
Copyright © 2005 Nokia. All Rights Reserved.
Nokia Customer Care
55