Updating Phoenix Installation - Nokia RH-37 Series Service Software And Tuning Instructions

RH-37
Service Software and Tuning Instructions
Now the installation of Phoenix Service SW is ready and it can be used after:
• installing phone model specific Phone Data Package for Phoenix
• configuring users and connections
FLS-4S can be used right away.
FPS-8* can be used after updating Flash Update Package files to it .

Updating Phoenix installation

If you already have the Phoenix Service SW installed on your computer, sooner or later
there will be need to update it when new versions are released.
Always use the latest available versions of both the Phoenix Service SW and the Phone
Specific Data Package. Instructions can be found in phone model specific Technical Bul-
letins and Phone Data package readme.txt files (shown during installation).
To update Phoenix, you need to take exactly the same steps as when installing it for the
first time.
• Download the installation package to your computer hard disk.
• Close all other programs.
• Run the application file (e.g. phoenix_service_sw_a12_2003_50_6_35.exe).
A newer version of Phoenix will be installed.
Driver versions will be checked and if need be, updated.
When you update Phoenix from an old to a new version (e.g. a11_2003_41_5_28 to
a12_2003_50_6_35 ), the update will take place automatically without uninstallation.
If you try to update Phoenix with the same version that you already have (e.g.
a12_2003_50_6_35 to a12_2003_50_6_35 ), you are asked if you want to uninstall the
version of Phoenix you have on your PC. In this case, you can choose between total
uninstallation and repair, just like when you choose to uninstall Phoenix service software
from the Windows control panel.
If you try to install an older version (e.g. downgrade from a12_2003_50_6_35 to
Page 12
Nokia Corporation
Nokia Customer Care
Issue 1 07/04