Nokia RH-37 Series Service Software And Tuning Instructions page 60

RH-37
Service Sofftware and Tuning Instructions
Adjust DAC Values for all power levels according to the target values:
Power level
0
11
15
Base level
The power levels may differ from the target levels mentioned. Make sure that the output
power for Power Level 0 is equal or lower than 1dB below the saturation output power.
Determine the saturation power by setting the DAC Value to its maximum, for example,
adjust the DAC Value to 29.7dBm for Power Level 0 if the saturation output power is only
30.7dBm.
Due to high gain slope, you have to ensure, that especially the lower power levels meet
the target values and correct them if needed.
Check if all levels match the target values, correct if necessary and then press < Save &
Continue >.
Page 60
Power (dBm)
30
8
0
-27
Nokia Corporation
Nokia Custome Care
Issue 1 07/04