Jbv-1 Docking Station Sw; Before Installation; Installing Sw Needed For The Jbv-1 Sw Update - Nokia RH-37 Series Service Software And Tuning Instructions

Nokia Customer Care

JBV-1 Docking Station SW

The JBV-1 Docking Station is a common tool for all DCT-4 generation products.
In order to make the JBV-1 usable with different phone models, a phone specific Docking
Station Adapter is used for different service functions.
The JBV-1 Docking Station contains Software (Firmware) which can be updated.
You need the following equipment to be able to update JBV-1 software:
• PC with USB connection
• Operating System supporting USB (Not Win 95 or NT)
• USB Cable (can be purchased from shops or suppliers providing PC hardware and
accessories)
• JBV-1 Docking Station
• External Power Supply 11-16V

Before installation

Download the Jbv1_18_update.zip file to your computer (e.g. C:\TEMP) from your down-
load web site.
Close all other programs.
Follow instructions on the screen.

Installing SW needed for the JBV-1 SW update

Note: DO NOT CONNECT THE USB CABLE / JBV-1 TO YOUR COMPUTER YET!
Run Jbv1_18_update.zip file and start SW Installation by double clicking Setup.exe.
Files needed for the JBV-1 Package setup program will be extracted.
Issue 1 07/04
Company confidential
Copyright Nokia. All rights reserved.
Service Software and Tuning Instructions
RH-37
Page 37