Nokia RH-37 Series Service Software And Tuning Instructions page 26

RH-37
Service Software and Tuning Instructions
In the next dialogs, you are asked to select some settings for the connection.
Manual settings
A) For FLS-4S POS Flash Device choose following connection settings
• Media: FBUS
• COM Port: Virtual COM Port used by FLS-4. Please check this always!
(To check please go to Windows / Control Panel / FLS Virtual Port / Configuration)
B) For FPS-8 Flash Prommer choose following connection settings:
• Media: FPS-8
• Port Num: COM Port where FPS-8 is connected
• COMBOX_DEF_MEDIA: FBUS
Choose "Finish" to complete.
Page 26
Nokia Corporation
Nokia Customer Care
Issue 1 07/04