Nokia RH-37 Series Service Software And Tuning Instructions page 42

RH-37
Service Software and Tuning Instructions
You have now updated the JBV-1 software and it is ready for use.
If you have several docking stations you need to update, disconnect the Power & USB
cables from the previous one and connect them to the next docking station.
Choose "Refresh Status" to see the current SW version and then "Update Firmware" to
update the SW.
After you have updated all docking stations, close the "JBV-1 Firmware Update" dialog.
Page 42
Company confidential
Copyright Nokia. All rights reserved.
Nokia Customer Care
Issue 1 07/04