Transducer Cable Connections - Raymarine E66008 Owner's Handbook Manual

All manuals and user guides at all-guides.com
Chapter 2: Installation

2.4 Transducer Cable Connections

The transducer cable connector (and Y-connector, if supplied) has a
nut that has been removed to aid installation. To allow you to
complete the installation without cutting the cable, ensure that any
holes you drill are large enough to accept the connector, with the nut
removed (approximately 13/16" or 21mm).
Before attaching the transducer cable, you will need to attach the
connector nut and split ring. These items, plus a wedge tool, are
included in the transducer packaging.
Figure 2-19:
CAUTION:
Take care not to pull on the cable – this can damage the
transducer wires.
Assembling the Transducer Connector
39
Connector/cable
Protrusion
Mounting groove
Nut
Split
Split ring
Wedge tool
D5256-1