Adjusting The Harness; Using The Blower - Shindaiwa EB630 Owner's/Operator's Manual

Adjusting The Harness

The Shindaiwa EB630 Blower features an
advanced harness system that helps ensure
maximum operator comfort and ease of
operation.
n The shoulder harness is filled with soft
padding for reduced operator fatigue.
n The simplified adjustment system
makes it easy to match the harness to
every body size and type.
Throttle Limit Function
The EB630 has a throttle limit function that
allows the operator to pre-set the maxi-
mum full-throttle setting. This is useful for
limiting the noise emitted by the blower in
sound sensitive areas.
Setting Throttle Limit:
Move the throttle limit lever located on the
right hand side of the throttle control to the
dB setting.

Using the Blower

Operating Tips
In the hands of an experienced operator,
the EB630 can efficiently move a wide
variety of debris ranging from grass clip-
pings to gravel. As a general rule, operate
your blower at the lowest throttle setting
required to get the job done:
Comfortable
Back Pad
Quick-
disconnect
Spring Hook
Quick-adjust
Buckle
Limit Lever Adjustment
Full Throttle
Setting
Throttle Limit
Setting
Adjusting Throttle Limit:
1. Remove the plug located at the top of
the throttle assembly.
RT Throttle RT
n Use low throttle settings when clearing
lightweight materials from around lawns
or shrubbery.
n Use medium to higher throttle settings
to move grass or leaves from parking
lots or walkways.
n Use full throttle when moving heavy
loads such as dirt or snow.
To tighten straps...
Easy-adjusting
Buckles
Pull the
quick-adjust
buckles up...
Pull on the loops to
quickly tighten the
harness straps.
. Move the throttle limit lever to the
"limit" setting.
3. Using a small Phillips screw driver,
Turn the adjustment screw clockwise
to decrease limit RPM and counter-
clockwise to increase until desired limit
RPM is achieved.
4. Reinstall limit plug.
Throttle Limit
Remove Limit
Lever
Adjustment Plug
Blower noise increases at higher throttle
settings! Always use the lowest throttle
setting required to get the job done!
Quick-adjust
Buckle
Pull strap
loops
down.
To loosen straps...
...and pull the
straps down.
IMPORTANT!
9