Adjusting The Harness; Using The Blower - Shindaiwa 68242-94311 Owner's/Operator's Manual

Adjusting The Harness

The Shindaiwa blower features an
advanced harness system that helps
ensure maximum operator comfort and
ease of operation.
■
The shoulder harness is filled with soft
padding for reduced operator fatigue.
■
The simplified adjustment system
makes it easy to match the harness to
every body size and type.

Using The Blower

Operating Tips
In the hands of an experienced operator,
the blower can efficiently move a wide
variety of debris ranging from grass clip-
pings to gravel. As a general rule, operate
your blower at the lowest throttle setting
required to get the job done:
12
B
A
Pull on the loops to quickly
tighten the harness straps.
Quick- disconnect
spring hook
Figure 20
■
Use low throttle settings when clear-
ing lightweight materials from around
lawns or shrubbery.
■
Use medium to higher throttle settings
to move grass or leaves from parking
lots or walkways.
To tighten straps...
B
Comfortable
back pads
A
Pull the quick-adjust
buckles up...
A
= Adjust height
B
= Adjust angle
■
Use full throttle when moving heavy
loads such as dirt or snow.
Blower noise increases at higher throttle
settings! Always use the lowest throttle set-
ting required to get the job done!
Quick-adjust
buckle
Pull strap
loops
down.
To loosen straps...
...and pull the
straps down.
IMPORTANT!