Adjusting Engine Idle Speed; Adjusting The Harness - Shindaiwa EB500 Owner's/Operator's Manual

Adjusting Engine
Idle Speed
IMPORTANT!
A clean and unrestricted airflow is essen-
tial to your blower's engine performance
and durability! Before attempting any
carburetor adjustments, inspect and clean
the engine air filter as described on page
9 of this manual.
IMPORTANT!
Blower tubes and the air cleaner must
be in place while adjusting engine idle!
Engine idle speed will also be affected
if the blower tubes are blocked or incor-
rectly installed!
1. Place the unit on the ground and
start the engine, then allow it to idle
2-3 minutes until warm.
2. If a tachometer is available, the engine
idle speed should be final adjusted to
2,700 min .
-1
Idle Speed
Adjustment Screw
NOTE:
Carburetor fuel mixture adjustments are
preset at factory on units with emission
control systems and cannot be serviced in
the field.

Adjusting The Harness

The Shindaiwa EB500 Blower features
an advanced harness system that helps
ensure maximum operator comfort and
ease of operation.
The adjusting strap lets the
user determine how far apart
the upper harness loops are
postioned. Easy to
customize for maximum
comfort.
Comfortable
Back Pad
Quick-disconnect
Spring Hook
To tighten straps...
Pull strap
loops
down
n The shoulder harness is filled with
soft padding for reduced operator
fatigue.
n The simplified adjustment system
makes it easy to match the harness
to every body size and type.
Adjustment Holes
Adjusting Strap
Pull on the loops to
quickly tighten the har-
Quick-adjust
Buckle
To loosen straps...
Pull the
Quick-adjust quick-
Buckle adjust
buckles
up...
...and
pull the
straps
down.
ness straps
7