Adjusting The Harness; Using The Blower - Shindaiwa EB630 Operator's Manual

Hide thumbs Also See for EB630:
Table of Contents

Advertisement

Adjusting The Harness

The Shindaiwa EB630 Blower features an
advanced harness system that helps ensure
maximum operator comfort and ease of
operation.
 The shoulder harness is filled with soft
padding for reduced operator fatigue.
 The simplified adjustment system
makes it easy to match the harness to
every body size and type.

Using The Blower

OPERATING TIPS
In the hands of an experienced operator,
the EB630 can efficiently move a wide
variety of debris ranging from grass clip-
pings to gravel. As a general rule, operate
your blower at the lowest throttle setting
required to get the job done:
 Use low throttle settings when clearing
lightweight materials from around lawns
or shrubbery.
 Use medium to higher throttle settings
to move grass or leaves from parking
lots or walkways.
 Use full throttle when moving heavy
loads such as dirt or snow.
IMPORTANT!
Blower noise increases at higher throttle
settings! Always use the lowest throttle
setting required to get the job done!
Comfortable
Back Pad
Quick-discon-
nect Spring
Hook
Quick-adjust
Buckle
Throttle Limit Function
The EB630 has a throttle limit function that
allows the operator to pre-set the maxi-
mum full-throttle setting. This is useful for
limiting the noise emitted by the blower in
sound sensitive areas.
Setting throttle limit:
Move the throttle limit lever located on the
right hand side of the throttle control to the
dB setting.
Limit Lever Adjustment
Full Throttle Set-
ting
Throttle Limit
Setting
To tighten straps...
Easy-adjusting
Buckles
Pull the
quick-adjust
buckles up...
Pull on the loops to
quickly tighten the har-
ness straps
Adjusting throttle limit:
1. Remove the plug located at the top of
the throttle assembly.
2. Move the throttle limit lever to the
"limit" setting.
3. Using a small Phillips screw driver, Turn
the adjustment screw clockwise to de-
crease limit RPM and counter-clockwise
to increase until desired limit RPM is
achieved.
4. Reinstall limit plug.
Remove limit
adjustment plug
Throttle Limit
Lever
Quick-adjust
Buckle
Pull strap
loops
down
To loosen straps...
...and pull the
straps down.
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents