Connections - Panasonic KX-FC971CX-S Service Manual

Thermal fax with digital cordless phone
Table of Contents

Advertisement

KX-FC971CX-S / KX-FGA521CX-S
4.2.

CONNECTIONS

Important:
· The unit will not function when there is a power
failure. To make calls in emergency situations, you
should connect a telephone that can function during
a power failure to the telephone line.
4.2.1.
Base unit
(1) Paper stacker
· The paper stacker will drop to a lower angle after inserting
into the base unit.
· The paper stacker may not be shown in all illustrations in
these operating instructions.
(2) Power cord
· Connect to the power outlet (220 V - 240V, 50/60 Hz).
(3) Telephone line cord
· Connect to [LINE] jack and a single telephone line jack.
(4) [EXT] jack
· Remove the stopper if attached.
(5) Handset cord
(6) Extension telephone (not included)
Caution:
· When you operate this product, the power outlet
should be near the product and easily accessible.
· Be sure to use the telephone line cord included in
this unit.
· Do not extend the telephone line cord.
· Keep the base unit away from walls as far as
possible to prevent a recording paper jam .
Note:
· Before you can make calls, the dialing mode setting
may need to be changed.
4.2.2.
Charger Unit
(1) Hooks
· Fasten the AC adaptor cord to prevent it from being
disconnected.
(2) AC adaptor
· Connect to the power outlet (220 V - 240 V, 50/60 Hz).
CAUTION:
· USE ONLY WITH the included Panasonic AC
adaptor.
· The AC adaptor must remain connected at all times.
(It is normal for the adaptor to feel warm during
use.)
· The AC adaptor should be connected to a vertically
oriented or floor-mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted AC outlet, as
the weight of the adaptor may cause it to become
disconnected.
16

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-fga521cx-s

Table of Contents