Panasonic KX-FC971CX-S Service Manual page 49

Code Function
595 Receive error limit check
596 Transmit level set
598 Receiving sensitivity
710 Memory clear except History data
717 Transmit speed selection
718 Receive speed selection
722 Redial tone detect
731 CPC mode
745 Power ON film feed
763 CNG detect time for friendly reception 1:10 sec
771 T1 timer
774 T4 timer
784 Voice prompt test
815 Sensor & Vox check
852 Print test pattern
853 Top margin
874 DTMF on time
875 DTMF off time
880 History list
881 Journal 2 list
882 Journal 3 list
7.3.4. Memory Clear Specification
1
* Execute Service Mode #550 when you want to reset the all setting data keeping the user information.
2
* Execute Service Mode #710 to clear the user information in case that Main Unit is recycled.
Note:
Please restart a power supply after clearing a memory.
Set Value Effective Default
Range
1: 5% 1~4
2: 10%
3: 15%
4: 20%
X dBm -15~00
43= -43 dBm 20~48
1:9600BPS 1~4
2:7200BPS
3:4800BPS
4:2400BPS
1:9600BPS 1~4
2:7200BPS
3:4800BPS
4:2400BPS
1:ON 2:OFF 1, 2
X 10 msec 1~255
1:ON 2:OFF 1,2
1~3
2:20 sec
3:30 sec
1:35 sec 1, 2
2:60 sec
X 100 msec 00~99
1~9
X 10 msec 6~20
X 10 msec 6~20
49
Remarks
2
-10 Selects the FAX transmission level. Refer to
Sometime there is a transmit problem (P.72)and
Receive Problem (P.73).
42 Used when there is an error problem. Refer to The
unit can copy, but cannot transmit/receive(P.74).
Refer to Memory Clear Specification(P.49).
1 Adjusts the speed to start training during FAX
transmission. Refer to Sometime there is a transmit
problem (P.72)and The unit can copy, but cannot
transmit/receive(P.74).
1 Adjusts the speed to start training during FAX
reception. Refer to Receive Problem(P.73) and The
unit can copy, but cannot transmit/receive (P.74).
1
036 Sets the CPC signal detection mode from the
converter.
1 Invalid function for thermal model.
3 Selects the CNG detection tone of friendly reception.
2 Sets a higher value when the response from the other
party needs more time during FAX transmission.
00 Use this function when delay occurs in the line and
communication (ex. Mobile comm) does not work well.
See TEST FUNCTIONS(P.50).
See TEST FUNCTIONS(P.50).
See TEST FUNCTIONS (P.50).
10
10
10
See Special service journal reports (P.88).
See Special service journal reports (P.88).
KX-FC971CX-S / KX-FGA521CX-S
----------
----------
----------
----------
----------
----------