Recording Paper - Panasonic KX-FC971CX-S Service Manual

KX-FC971CX-S / KX-FGA521CX-S
4.4.

RECORDING PAPER

1. Open the top cover by pressing the top cover release button
(1).
2. Install the recording paper.
3. Insert the leading edge of the paper into the opening above
the thermal head (1).
4. Pull the paper out of the unit.
· Make sure that there is no slack in the paper roll.
5. Close the top cover securely by pushing down on both
sides.
6. Press [FAX/START] to cut the paper.
Note:
· If the paper is secured with glue or tape, cut
approximately 15 cm from the beginning of the roll
before installing it.
· When the power cord is connected, a message is
printed each time the top cover is opened then
closed. If the recording paper is installed upside
down, the message will not be printed. Install the
paper correctly.
· For accessory
ACCESSORIES (P.9).
18
information, see OPTIONAL