Table of Contents
Advertisement
KX-FC971CX-S / KX-FGA521CX-S
8.5.1.
MOTOR POSITION SENSOR
This sensor is a detection switch for recording the position of the CAM.
8.5.2.
CUTTER POSITION SENSOR
8.5.3.
RECORDING PAPER SENSOR (SW501)
When there is no recording paper, the plate is separated from the switch lever and the switch turns off. Pin 45 of IC10 becomes
a high level. When there is recording paper, the plate pushes the switch lever and the switch turns ON. Pin 45 of IC10 becomes
a low level.
Digital Board
Signal (IC10-43 Pin)
Home position
Low level
Other
High level
Digital Board
Signal (IC10-20 Pin)
Home position
Low level
Other
High level
Analog Board
Signal (IC10-45 Pin)
Paper
Low level
No paper
High level
150
Advertisement
Table of Contents
Troubleshooting
