Removing The Shipping Materials; Connections - Panasonic KX-F1600 Operating Instructions Manual

Removing the shipping materials
1. Remove the shipping tape from the outside of the unit.
2. Remove the protective sheet inside the paper tray.
3. Slide the front lid open lever towards you to open the front lid.
4. Remove the tape that protects the paper thickness lever and the print cartridge holder.
Front lid
open lever
Note:
OAS you unpack the unit, save the carton and packing materials in case you want to move or ship the unit in
the future.
Connections
Handset
Power cord
Handset cord
Telephone line
X cord
Power outlet
(120 V, 60 Hz)
Dialing mode switch:
Set to TONE.
— If you cannot dial, set to
PULSE.
DIALING MODE
X
Single telephone line Connect to LINE.
(RJ11C)
TONE 1! PULSE
Note:
oWhen you connect the telephone line cord to the single telephone line jack, connect from the LINE
jack. Do not connect from the EXT. jack or SCANNER OUTPUT port.
oThe unit will not function during a power failure.
oFor additional equipment protection, we recommend the use of a surge protector. The following types are
available; TELESPIKE BLOK MODEL TSB (TRIPPE MFG. CO.), SPIKE BLOK MODEL SK6-0 (TRIPPE
MFG. CO.), SUPER MAX (PANAMAX) or MP1 (ITW LINX).
8