Table of Contents
Advertisement
C
O
M
M
E
R
C
SETTING A COOL DOWN TIME LIMIT
You can set a limit to the duration of a user's cool down time in one-minute incre-
ments. It is highly recommended, in most workout literature, that a user cool down for
at least three minutes to allow their heart rate to return to a "normal," non-exercising
state. A cool down period also allows lactic acid, which may have built up in a person's
body during a workout, to dissipate somewhat during the cool down phase.
After the scrolling prompt appears, use the ▼▲ keys to set a cool down time limit
between 1 and 5 minutes.
Press SELECT to accept the displayed value and return to the PRECOR banner.
For other options, refer to step 4 on the previous page.
VIEWING THE ODOMETER, HOURS OF USE, SOFTWARE
VERSION, ERROR LOG, AND SERIAL NUMBER
Important: Review Programming Tips on the previous page before taking the
following steps.
To view the odometer, the number of hours that the running belt has been in use,
the C932i software version number, or the error log, begin at the PRECOR banner
and press the following key sequence:
RESET, SPEED ▼, SELECT
The numbers 6, 5 appear on the display as you press the associated key.
The field name MILES or KILOMETERS scrolls across the display and indicates
the unit of measure currently in use by the treadmill. The odometer value ap-
pears next. The odometer tracks the running belt movement. The numeric value
that appears indicates the distance traveled in cumulative miles or kilometers.
The message continues to scroll until you press a key. Refer to Programming
Tips on page 22.
Press the SELECT key and the word HOURS scrolls across the display. The
number that follows indicates the hours of that the running belt has been in use.
The C932i actually notes the passing of program minutes, but the numeric value
that appears is truncated to the nearest full hour.
Press SELECT again and the unit's three digit software version number (upper
display software version) scrolls past followed by the lower board's software ver-
sion number. The words "UPPER SW:" and "LOWER SW:" appear prior to the
version being displayed.
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
page 25
Advertisement
Table of Contents
