Labeling A Cassette - Sony DCR-TRV17 Operating Instructions (primary manual) Operating Instructions Manual

Labeling a cassette

(1) Insert the cassette you want to label.
(2) Set the POWER switch to VCR.
(3) Press MENU to display the menu.
(4) Turn the SEL/PUSH EXEC dial to select
(5) Turn the SEL/PUSH EXEC dial to select TAPE TITLE, then press the dial. Tape
(6) Turn the SEL/PUSH EXEC dial to select the column of the desired character,
(7) Turn the SEL/PUSH EXEC dial to select the desired character, then press the
(8) Repeat steps 6 and 7 until you finish the label.
(9) Turn the SEL/PUSH EXEC dial to select [SET], then press the dial.
4,5
94
If you use a tape with cassette memory, you can label a cassette. The label can
consist of up to 10 characters and is stored in cassette memory. When you insert
the labelled cassette and turn the power on, the label is displayed for about five
seconds.
title display appears.
then press the dial.
dial.
The label is stored in memory.
CM SET
T I TLE
T I TLEERASE
T I TLE DSPL
CM SEARCH
TAPE T I TLE
ERASE ALL
CM SET
T I TLE
T I TLEERASE
T I TLE DSPL
[ MENU ] : END
CM SEARCH
TAPE T I TLE
ERASE ALL
TAPE T I TLE
[ MENU ] : END
[ MENU ] : END
, then press the dial.
3
MENU
6-8
TAPE T I TLE
[ MENU ] : END
TAPE T I TLE
[ MENU ] : END
TAPE T I TLE
[ MENU ] : END
TAPE T I TLE
M
[ MENU ] : END