Adjusting The Brightness Of The Lcd Screen - Sony DCR-TRV17 Operating Instructions (primary manual) Operating Instructions Manual

Recording a picture
When you use the LCD screen outdoors in direct sunlight
The LCD screen may be difficult to see. If this happens, we recommend that you use the
viewfinder.
Picture in the mirror mode
The picture on the LCD screen is a mirror-image. However, the picture will be normal
when recorded.
During recording in the mirror mode
ZERO SET MEMORY on the Remote Commander does not work.
Indicators in the mirror mode
The STBY indicator appears as Xz and REC as z. Some of the other indicators appear
mirror-reversed and others are not displayed.

Adjusting the brightness of the LCD screen

Adjust the brightness of the LCD screen with LCD BRIGHT in
(p. 98).
LCD screen backlight
You can change the brightness of the backlight. Select LCD B.L. in the menu settings
(p. 98).
Even if you adjust the LCD screen backlight or brightness of the LCD screen
The recorded picture will not be affected.
After recording
(1) Set the POWER switch to OFF (CHG).
(2) Close the LCD panel.
(3) Eject the cassette.
MENU
in the menu settings
L C D / V F S E T
L C D B R I GH T
[ ME N U ] : E N D
23