Sony DCR-TRV17 Operating Instructions (primary manual) Operating Instructions Manual page 37

Viewing the recording on TV
If you turn the power off
The super laser link function turns off automatically.
If you use a Sony TV
•You can turn on the TV automatically when you press SUPER LASER LINK. To do so,
make sure you:
– Turn the TV's main switch on.
– Set AUTO TV ON to ON in the menu settings.
– Point the super laser link emitter at the TV's remote sensor.
•You can switch the video input of the TV automatically to the one which the AV
cordless IR receiver is connected. To do so, set AUTO TV ON to ON and TV INPUT to
the same video input (1, 2, 3) in the menu settings. With some models, however, the
picture and sound may be disconnected momentarily when the video input is switched.
•The above feature may not work on some TV models.
When the super laser link function is activated (the SUPER LASER LINK button is lit)
Your camcorder consumes power. Press SUPER LASER LINK to turn off the laser link
function when it is not needed.
is a trademark of Sony Corporation.
37