Polycom VVX 150 Manual page 82

Any group member can respond to an incoming call to the shared line. When a group member
answers an incoming call, the line key's LED indicator on all phones changes to a steady red light to
indicate the call was answered. Members can also view the status of a call on the shared line by
pressing and holding the corresponding line key for one second. The call's status and the Bridge In soft
key display for five seconds.
Related Topics
Alcatel-Lucent Shared Call Appearance
Bridge In to an Active SCAP Call
Multiple group members can bridge in to one call if the call is public. After a group member bridges in
to a call, the call becomes a bridge call—a call between two or more SCAP members and another
party.
Ask your system administrator about the maximum number of participants allowed on a bridge call.
If the call is private or if bridging is disabled, the Bridge In soft key does not display or you cannot
bridge in to active calls answered by other group members.
Procedure
1 Press and hold the line key with the active call for one second.
2 Select Bridge In.
If enabled, a bridge tone plays notifying the other call participants that you are bridging in on the
call.
Related Topics
Alcatel-Lucent Shared Call Appearance
Leave a Bridge SCAP Call
Any member in a bridge call can leave the call, and the call remains active.
Procedure
•
Select the End Call soft key or place the handset in the cradle.
Your connection to the bridge call is ended, and the other call participants remain on the call.
You can rejoin a bridge call after leaving by pressing the Bridge In soft key again.
Printed from Polycom, Inc. (http://documents.polycom.com) #{renderLang "en" MsgPDFPage} 82