Polycom VVX 150 Manual page 161

To set up a screen saver of your photos, you must set up certain screen saver settings, place your
photos on a USB flash drive, and attach the USB flash drive to the phone.
The photos you use must have the following file type and size properties:
•
File type: BMP, JPEG, or PNG
•
Maximum size: 9999 x 9999 pixels
The phone can only display the photos as your screen saver when the USB flash drive is attached to
the phone. You can set up your phone to use a single photo to display or have all photos display in
slide-show style. This is an alternative to setting up a screen saver, and it automatically starts each
time your phone is idle a certain amount of time.
For VVX 450 phones with connected expansion modules, you can connect a USB drive to the side
USB port on the expansion module to display a slideshow for the screen saver. However, the VVX
EM50 expansion module doesn't support the slideshow feature. The expansion module will display the
default screen saver images while the phone displays the slideshow images.
Procedure
1 Place one or more photos onto a USB flash drive, either in the root directory or in a folder.
2 Attach the USB flash drive to your phone.
The USB icon
3 Go to Settings > Basic > Preferences.
4 Select Picture Frame > Folder, and enter the name of the folder you placed your photos in on
the USB flash drive.
If you placed the photos in the root directory of your USB flash drive instead of a folder, do not
enter a folder name.
5 Select Time Per Image, and enter the number of seconds you want each photo to display.
You can enter a minimum of 3 seconds and a maximum of 300 seconds. The default is 5
seconds.
6 Select Save.
If the message "No pictures found" displays after you select Save, there are no photos in the
folder you specified or in the root directory. Go back and make sure the information you entered
is correct.
7 Go to Settings > Basic > Preferences.
8 Select Screen Saver > Screen Saver screen and select Enabled.
9 Select Wait Time and enter the number of minutes the phone should wait after no activity
before displaying the screen saver.
Enter a time between 1 and 9999 minutes. The default is 15 minutes.
10 Select Save.
Your phone displays the screen saver after the number of minutes you specified in the Wait
Time field.
Printed from Polycom, Inc. (http://documents.polycom.com)
is displayed on the status bar.
#{renderLang "en" MsgPDFPage} 161