Polycom VVX 150 Manual page 76

Only one contact can barge in on a call at a time. Contacts can barge in on remote held calls using the
Normal barge in mode but cannot barge in on parked calls.
This feature is not supported on VVX 150 phones. Check with your system administrator to find out if
this feature is available on your phone.
You can barge in on a call using one of the following modes:
•
Normal (audio and video calls)—Initiates a conference call with you and the contacts currently
in the call.
•
Whisper (audio-only)—Enables you to barge in on audio calls only to talk to a contact in the
call without the far-end hearing your audio. This mode is not available for video calls.
•
Listen (audio-only)—Enables you to barge in to audio calls only and listen to the other parties'
conversation without anyone hearing your audio. This mode is not available for video calls.
Procedure
1 During an active call, select Barge In.
2 On the Barge In screen, select a mode.
If enabled, a tone plays when you barge in to a call using any of the modes.
Related Topics
Shared Lines
Access the Call Actions for BroadWorks Dynamic Busy
Lamp Field (BLF)
You can access the call actions settings on the phone and modify the settings from the Attendant Call
Action menu when dynamic BLF is configured on the phone.
Prerequisite
You can one touch the following BLF actions on the phone:
•
Dial-Pickup - Indicates the single-press action to use the BLF as a speed dial except the alerting
state.
•
Blind - Enables the active call to blind transfer to another user with one press of the associated
BLF key.
•
Park - Enables one-touch call park and retrieve using the BLF keys.
Printed from Polycom, Inc. (http://documents.polycom.com) #{renderLang "en" MsgPDFPage} 76