Polycom VVX 150 Manual page 49

Call Park is different from call hold in that the call is parked on another contact's line, which enables
you to continue using your phone to place other calls. Call Park is also available for shared lines.
Check with your system administrator to find out if this feature is available on your phone.
Related Topics
Audio Calls
Park a BroadSoft Call
You can park a call directly on a contact's line. When you park a call on a contact's line, the call is
removed from your phone and the contact is notified that a call is parked on his or her line.
When a contact sends a parked call to your extension, the following notifications are displayed or
played on your phone:
•
The Call Park icon
•
The message "Call is parked" in the status bar.
•
An audio notification plays, if enabled by your system administrator. Audio notifications are not
available for BLF monitored contacts.
The Call Park icon
contacts on connected expansion modules.
Procedure
•
During a call, press Hold and dial *68 and the contact's line extension.
For example, dial *684144.
Related Topics
Parking and Retrieving Calls on the BroadSoft BroadWorks Server
Retrieve a Parked BroadSoft Call
When a contact parks a call on your line, the status message and the Call Park icon display on your
phone until the parked call is either retrieved, ignored, or the parked caller ends the call.
If a parked call is not answered after a period of time, which is set by your system administrator, the
call is returned to the parker—the person who parked the call. If the parker answers the returned call,
the parked call is removed from the parked extension. If the parker rejects the returned call, the parked
call remains on the parked extension until the call is returned to the parker and answered or the parked
caller ends the call.
Printed from Polycom, Inc. (http://documents.polycom.com)
.
also displays for shared lines, monitored contacts, and for lines and monitored
#{renderLang "en" MsgPDFPage} 49