Handsfree Calling (Via Bluetooth Only) (Cde-172Bt/ Ute-73Bt Only); Receiving A Call; Making A Call - Alpine CDE-172BT Owner's Manual

Handsfree Calling (via
BLUETOOTH only) (CDE-172BT/
UTE-73BT only)
To use a cellular phone, connect it with this unit.
You can connect two cellular phones to the unit.
For details, see "Preparing a BLUETOOTH Device
(CDE-172BT/ UTE-73BT only)" (page 9).

Receiving a Call

1
Press when a call is received with a
ringtone.
The phone call starts.
Note
The ringtone and talker's voice are output only from the
front speakers.
To reject the call
Press and hold SLEEP for 2 seconds.
To end the call
Press again.

Making a Call

You can make a call from the phonebook or call
history when a cellular phone supporting PBAP
(Phone Book Access Profile) is connected.
When two cellular phones are connected to the
unit, select either phone.
From the phonebook
1
Press .
When two cellular phones are connected to
the unit, rotate the control dial to select
either phone, then press it.
18
-EN
2
Rotate the control dial to select [PHONE
BOOK], then press it.
3
Rotate the control dial to select an initial
from the initial list, then press it.
4
Rotate the control dial to select a name
from the name list, then press it.
5
Rotate the control dial to select a
number from the number list, then press
it.
The phone call starts.
From the call history
1
Press .
When two cellular phones are connected to
the unit, rotate the control dial to select
either phone, then press it.
2
Rotate the control dial to select
[HISTORY], then press it.
A list of the call history appears.
3
Rotate the control dial to select a name
or phone number from the call history,
then press it.
The phone call starts.
By phone number input
1
Press .
When two cellular phones are connected to
the unit, rotate the control dial to select
either phone, then press it.
2
Rotate the control dial to select [DIAL
NUMBER], then press it.
3
Rotate the control dial to enter the
phone number, and lastly select [ ]
(space), then press ENTER
The phone call starts.
* To move the digital indication, press
Note
[ _ ] appears instead of [ # ] on the display.
*
.
/ .