Playing A Bluetooth Device; Ute-73Bt Only); Searching And Playing Tracks - Alpine CDE-172BT Owner's Manual

Playing a BLUETOOTH Device

(CDE-172BT/ UTE-73BT only)
You can play contents on a connected device
that supports BLUETOOTH A2DP (Advanced
Audio Distribution Profile).
1
Make BLUETOOTH connection with the
audio device (page 9).
To select the audio device, press and hold
SETUP for at least 2 seconds, then select
[BLUETOOTH] [AUDIO DEVICE] (page 24).
2
Press SOURCE to select [BT AUDIO].
3
Operate the audio device to start
playback.
4
Adjust the volume on this unit.
Notes
• Depending on the audio device, information such as
title, track number/time and playback status may not
be displayed on this unit.
• Even if the source is changed on this unit, playback of
the audio device does not stop.
To match the volume level of the
BLUETOOTH device to other sources
Start playback of the BLUETOOTH audio device at
a moderate volume, and set your usual listening
volume on the unit.
Press and hold /SETUP for at least 2 seconds,
then select [AUDIO]

Searching and Playing Tracks

Repeat play and shuffle play
Not available when a USB device in Android
mode is connected.
1
During playback, press
(shuffle) repeatedly to select the
desired play mode.
16
-EN
[BTA VOL] (page 23).
(repeat) or
Playback in the selected play mode may take
time to start.
Available play modes differ depending on the
selected sound source.
Searching a track by name
Not available when a USB device in Android
mode or iPod is connected.
1
During CD or USB playback, press
(browse) to display the list of search
categories.
When the track list appears, press
/
repeatedly to display the desired search
category.
2
Rotate the control dial to select the
desired search category, then press it to
confirm.
3
Repeat step 2 to search the desired track.
Playback starts.
Searching by skipping items
(Jump mode)
Not available when a USB device in Android
mode or iPod is connected.
1
Press (browse).
2
Press
3
Rotate the control dial to select the item.
The list is jumped in steps of 10% of the total
number of items.
4
Press ENTER to return to the browse
mode.
The selected item appears.
5
Rotate the control dial to select the
desired item, then press it.
Playback starts.
.
(back)