Connecting A Bluetooth Device (Bluetooth Pandora® Only); Disconnecting The Bluetooth Connection; Changing The Connecting Bluetooth Device - Alpine HALO9 iLX-F309 Owner's Manual

Connecting a Bluetooth Device (Bluetooth
Pandora® Only)
Registering a Bluetooth device in the unit enables automatic connection.
If it does not connect automatically, run through the connection
procedure again.
1
Touch [ ] (Settings).
The Device Setting select pop up screen is displayed.
2
Touch [Reconnect].
Bluetooth connection will start.

Disconnecting the Bluetooth Connection

1
Touch [ ] (Settings).
The Device Setting select pop up screen is displayed.
2
Touch [Disconnect].
The Bluetooth connection is disconnected.

Changing the connecting Bluetooth Device

If multiple Bluetooth devices are registered in this device, you can
change the connection among the registered devices.
1
Touch [ ] (Settings).
2
Touch [Change].
3
Touch [ ] (Audio) or [
device.
The connection will transfer to the selected device.
60
-EN
] (Hands-free) of the selected