Panasonic GM1 Series Reference Manual page 18

2.2 Restrictions on the GM1 Controller and Servo Amplifiers
No. Name
RTEX speed
Pr7.25
unit setup
(Note 1) We recommend that the set value should not be changed judging from the characteristics of the GM1
and MINAS.
(Note 2) Do not change the set value. If the set value is changed, the GM1 Controller will make an error stop.
2-6
Description
Bit 15: Select extended RTEX status from In_Progress /
AC_OFF / Pr7.112 settings
0: Follow the setting of Pr7.23 bit 8 (In_Progress / AC_OFF)
1: Follow the setting of Pr7.112.
Use setting value "1 (command unit/s)".
(Mandatory)
Standard
factory
default
setting
(Note 2)
1
WUME-GM1H-01