Table of Contents
Advertisement
figure 63
Advanced Configuration Page
The Advanced Configuration page provides options that are not frequently changed.
The page is always available, but options are dimmed depending on the current user
privileges. It provides initial setup and administrator level configuration.
Figure 63.
Advanced Configuration Tab, Ribbon Bar
The pages within Advanced Configuration include the following:
Connection — Allows you to adjust the settings for the Ethernet connection, remap the
network ports, and to adjust settings for the RS-232 port.
Firmware Loader — Provides a way to upload and install firmware onto the SMD 101. It
also allows you to save and export configuration settings from the connected SMD 101 or
to import configuration settings from another SMD 101.
Executive/Power Mode — Allows you to enable or disable IR reception on the product,
enable or disable the playback control panel video confidence monitor within the embedded
web pages, and to set the power mode for the device.
Date and Time — Allows you to set the date and time on the SMD 101.
Password — Allows you to set an administrator and user password on the device.
Reset Device — Lets you select and execute one of three options for resetting the device
to factory default settings.
Alarms — Provides a way to configure and monitor system alarms.
SMD 101 • Web-based User Interface
66
Advertisement
Table of Contents
