Setting The Remote Control Detector - Sony PC-3000 Operating Instructions Manual

Adjustments and Settings on the Display Window
Canceling the DEMO mode
Flash OFF in the DEMO MODE display and press the
SET button.
You can display the CONTROL MENU when the
DEMO MODE is activated.
Changing the channel when the DEMO MODE
is activated
The following message appears even if you press the
SELECT button when the DEMO MODE is activated
and you cannot change the channel.
KEY Lo c k e d
(DEMO MODE)
Changing the output channel or the period
to display the signal
Press the >, ., ? or / button to change the setting
of the order, channel or period in the DEMO MODE
SETTING display.
22
(EN)
Setting the Remote Control
Detector
You can set the remote control detector to ON or OFF.
1
Turn on the power.
2
Press the CONTROL button.
3
Press the > or . button until the CONTROL
MENU SIRCS RECEIVER display appears.
CONTROL MENU
SIRCS RECEIVER
4
Press the SET button.
SIRCS RECEIVER
>ON >OFF
5
Press the ? or / button to flash OFF.
6
Press the SET button to enter the setting.